Mettler Toledo CountEasy-M Bedienungsanleitung Seite 4

General
Configuration register with CountEasy-M
uNIT
uNIT1
g kg
lb
k oz
C.M. ozt
ct tl
dwt GN
e - yes - -f-oui-
-D-ja--
-e-51--
-i-51--
au-p OT sel.p OT
-, aUTO - , ON
-eND-
2
CountEasy-M is a program cassette for SM scales, high-capacity PM scales or for AM/PM balances up to
6.1 kg with the GM303 Control Unit. It allows you to use your balance or scale for convenient counting
with a variable reference piece number.
The insertion of the program cassette is described in the operating instructions of the balance or scale
in the section "Configuration". When CountEasy-M is inserted, the application "Counting" can be
activated with the key after the balance or scale has been switched on.
The configuration register with CountEasy-M is distinguished from the configuration register of the
balance or scale with the standard program cassette only in the –Unit– sector. With CountEasy-M the
following can be selected in the –Unit– sector:
Language –E-YES– English (default setting)
–F-OUI– French
–d-JA– German
–E-SI– Spanish
–I-SI– Italian
Printout Au-Prot automatic printout (default setting)
printout only with the ∏ key
SEL.Prot
All further setting options are identical to those with the standard cassette, see operating instructions of
the balance or scale.
Notes
• If the configuration register can not be selected, check whether the jumper of the program cassette is in
the position "unsecured" (see operating instructions of the balance or scale, section "Configuration").
• When the balance or scale is reset to the default configuration (Reset), the language is not reset.