Switching On/Off - Bosch Quigo Originalbetriebsanleitung

24 | English
Operation
Start-up
Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or vari-
u
ations in temperature. For example, do not leave it in a car for extended periods
of time. In case of large variations in temperature, allow the measuring tool to ad-
just to the ambient temperature before putting it into operation. The precision of
the measuring tool may be compromised if exposed to extreme temperatures or
variations in temperature.
Avoid substantial knocks to the measuring tool and avoid dropping it. Dam-
u
aging the measuring tool can cause accuracy to be compromised. If the laser line
is subjected to a substantial knock or is dropped, check it by comparing it to a
known horizontal or vertical reference line.
Switch the measuring tool off when transporting it. The pendulum unit is
u
locked when the tool is switched off, as it can otherwise be damaged by big
movements.

Switching on/off

To switch on the measuring tool, push the on/off switch (4) up. Immediately after
switching on, the measuring tool sends two laser lines out of the outlet aperture (5).
Do not direct the laser beam at persons or animals and do not stare into the
u
laser beam yourself (even from a distance).
To switch off the measuring tool, push the on/off switch (4) downward over the
laser beam outlet aperture (5). The pendulum unit is locked when the tool is
switched off.
Never leave the measuring tool unattended when switched on, and ensure
u
the measuring tool is switched off after use. Others may be blinded by the
laser beam.
1 609 92A 4J2 | (10.08.2018) Bosch Power Tools