Kenwood CCC20 Instructions Seite 7

before plugging in
l
Make sure your electricity supply is the same as
the one shown on the underside of your appliance.
l
WARNING: THIS APPLIANCE MUST BE
EARTHED.
l
This appliance conforms to EC directive
2004/108/EC on Electromagnetic Compatibility and
EC regulation no. 1935/2004 of 27/10/2004 on
materials intended for contact with food.
before using for the first time
l
Remove the plastic blade covers from the blade.
These covers should be discarded as they are to
protect the blade during manufacture and transit
only.
l
Wash the parts: see 'care and cleaning'.
key
1
filler cap
2
lid
3
filling aperture
4
interlock tabs
5
lid seal
6
stirring paddle
7
processing blade
8
steaming basket
9
handles
bk
cooking bowl
bl
power on switch
bm
power unit
bn
display screen
bo
measuring cup
bp
spatula
bq
Temperature button
br
Time Decrease button
bs
Time Increase button
bt
Stir button
ck
Cancel button
cl
Chop button
cm
Start/Pause button
cn
One Pot programme
co
Sauce/Soups programme
cp
Steaming programme
cq Display screen graphics
temperature selection
cr
lid removed
cs
time selection
ct
stir selection
dk
hot temperature warning
dl
programme stage
dm
cooking mode
using your cooking food
processor
1 Switch on by pressing the power on
the left side of the power unit. The unit will beep,
the programme lights will come on and the display
screen will light up for an instant. The screen will
- --
then display
2 Fit the bowl to the power unit with the capacity
markings to the back of the unit. Press down lightly
to locate.
3 Fit the stirring paddle
8
basket to the bowl.
l
Use the blade for chopping ingredients before
cooking and for pureeing after cooking is complete.
l
Use the stirring paddle for recipes where you want
to stir gently without breaking the ingredients down.
4 Add the relevant ingredients to be processed or
cooked.
5 Fit the lid and filler cap – filler cap positioned to the
right hand front corner. Turn clockwise until the
interlock tabs are aligned with the handles and the
filler cap is positioned to the front of the unit.
6 Select one of the following options:
l
Manual Cooking
One Pot programme
Sauce/Soups programme
Steaming programme
Note: When a pre-set programme button is
pressed the unit will beep and the bar above the
relevant button will light up.
4
bl
switch on
and go into standby mode
6 7
blade or steaming
.