Kenwood CCC20 Instructions Seite 10

Manual Mode
Manually select the required temperature, time, stirring or chopping function.
65˚C 92˚C 100˚C
Hints & Tips
l
Once the timer has counted down to 0:00 the unit will beep and go into the Keep Warm cycle for
30 minutes. After 30 minutes has elapsed the display will go into standby mode until another selection is
made.
0:00 - 3:00hr
3 different temperature setting can be
selected.
Time can be set by pressing the (-)
and (+) buttons until the required time
is reached.
Note: Hold the button down for
3 seconds to scroll through the times
more rapidly.
Three stir functions are available which enable you to select the appropriate amount of
stirring for individual recipes. Some recipes will require constant stirring to stop
ingredients from sticking to the bottom of the bowl, whereas others will benefit from
intermittent stirring to maintain the consistency of the food.
- continuous stir – constant slow speed suitable for stirring sauces.
- intermittent stir with short pauses. When set to this position intermittently
operate on a slow speed once every 5 seconds for approximately 2
revolutions.
- intermittent stir with long pauses. When set to this position, intermittently
operate on a slow speed once every 30 seconds, making it suitable for
stirring casseroles etc.
l
Press to cancel the programme stage or function selected at any time.
l
If pressed during a pre-set programme the unit will return to the default settings.
l
The machine can be re-started by selecting the required programme stage on
screen and pressing start.
To activate - press and hold down the button for 2 seconds and the unit will beep
when the function is cancelled.
3 settings
= 65°C
= 92°C
= 100°C
Time can be manually set from
1 min – 3 hrs
7