Setting And Starting A Programme - Electrolux GA60SLISSP Benutzerinformation

CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
The AUTO OFF function
This function decreases energy
consumption by deactivating automatically
the appliance when it is not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1. Press the on/off button to activate the
appliance.
2. Close the appliance door.
3. Select a programme.
4. Select applicable options if desired.
5. Press the OK key, the programme
starts.
If the programme is applicable to the
option TimeSaver, you have to confirm
Fast or Normal.
How to delay the start of a
programme
It is not possible to set the delay start with
the MyFavourite programme.
1. Set the programme.
2. Press the Option key.
The display shows the option list.
3. Select Delay.
4. Press the OK key.
5. Select the number of hours desired for
the delay start. You can delay the start
of a programme from 1 to 24 hours.
6. Press the OK key to confirm the
number of hours selected.
The display shows the confirmation of the
delay start.
7. Press the Back key to return to the
selected programme.
The selected delay time is shown in the up
right corner of the display.
8. Press the OK key to start the
countdown. When the countdown is
completed, the programme starts.
Starting the MyFavourite
programme
1. Press the on/off button to activate the
appliance.
2. Close the appliance door.
3. Press and hold the OK key for about 3
seconds until the display shows the
MyFavourite setting.
If no programme has been saved the
display will automatically show the setting
Set MyFavourite.
Opening the door while the
appliance operates
If you open the door while a programme is
running, the appliance stops. When you
close the door, the appliance continues
from the point of interruption.
If the door is opened for more
that 30 seconds during the
drying phase, the running
programme will end. This will
not happen when programme
ECO with AutoOpen is
running.
Cancelling the delay start while
the countdown operates
When you cancel the delay start the
options are set to their default values and
ENGLISH 43