Dismantling; Environmentally Responsible Disposal - Maico EC 30 E Montage- Und Betriebsanleitung

Fault Cause, measure
Fan does No mains voltage.
not switch on. Check whether the mains fuse
has failed. Switch on if
necessary.
Motor's Motor too hot. The motor
thermal protection switch has switched
overload off the fan.
protection has Wait until the motor has cooled
switched the down. Cool-down time can be
fan off. up to 30 minutes.
CAUTION: The unit switches
back on automatically after
cooling down.
Fan does Impeller blocked. Check
not switch on. impeller and clean if
necessary.
Deposits on Imbalance if the impeller is
the impeller soiled or running irregularly.
caused by Clean unit with a damp cloth.
dust in the air.
Impeller not Switch off unit. Ensure that the
turning. impeller is not blocked by
foreign bodies.
If faults reoccur, send the unit to our
factory for repairs.
13. Fault rectification │ UK

14. Dismantling

Dismantling may only be undertaken
by a trained electrician.
5. Switch off mains fuse, secure against
being accidentally switched back on and
position a visible warning sign. Comply
with the 5 safety regulations.
15. Environmentally responsible
disposal
The unit and the packaging contain parts that
can be recycled, and should not end up in the
domestic waste.
Dispose of the packaging material in an
environmentally-friendly way, in compliance
with the regulations valid in the country where
you are.
At the end of its service life, dispose of the
unit in an environmentally-friendly way, in
compliance with the regulations valid in the
country where you are.
21