ATON C30 Bedienungsanleitung Seite 9

5. Position the telephone so that the screws on the wall fit
into the slots in the bracket, then slide the telephone
downwards until it is hanging on the screws.
6. Remove the handset hook (C) by pushing it upwards, and
insert it in the reversed position so that the small tab (D)
protrudes. The hook will now keep the handset in the
cradle when the phone is wall mounted.
C
7. Reconnect the handset and place it in the cradle.
Note!
If the phone is to be used as a desktop phone again,
remember to reverse the position of the handset hook.
English
D
C
6