Call Timer - ATON C30 Bedienungsanleitung

Caller ID and call memory
Caller ID allows you to see who is calling before you answer
and to see who has called in your absence.
Note!
The Caller ID function must be subscribed. Please
contact your network operator for more information.
The call memory will store the last 15 incoming and 15 outgoing
calls. On the display, incoming (answered and unanswered) calls
are indicated with
If the Call Indicator function is active, a blinking light
indicates that an unanswered call has been received since the
call memory was last checked.
Browsing the call memory
1. Press
memory. The number and time of each call will be
displayed. For calls older than 24 hours, the date of the
call is displayed instead of the time.
2. Press
Deleting numbers from the call memory
1. Press
2. Press and hold
Copying call memory entries to the phone book
1. Press
2. Press and hold * until
number has now been saved to the phone book.

Call timer

The display shows the current time when in standby mode.
During a call the display will show a call timer instead,
indicating the duration of the call. The call duration is
displayed for 5 seconds after the call is terminated.
English
and outgoing calls with
then v / V to scroll through the call
to exit the call memory.
then v / V to scroll through the call memory.
to delete the selected entry.
then v / V to scroll through the call memory.
OK
is displayed. The selected
12
.