ATON C30 Bedienungsanleitung Seite 7

-2- CONTRAST
Use v / V to set the display contrast setting
(1–4), and confirm with
KEYT. ON
Use v / V to set key tone ON/OFF, and confirm with
-100- FLASH
Use v / V to set the flash key time (100/300/600 ms) and
confirm with
The standard setting is 100 for Switzerland.
LED OFF
Use v / V to enable/disable the LED indicator for new
calls, and confirm with
TONE
Use v / V to select either tone or pulse dialling mode, and
confirm with
Note!
If unsure of which mode to use, select TONE as this
works in most locations.
English
.
.
.
.
4
.