Installation - ATON C30 Bedienungsanleitung

Connection
1. Connect the curly cord to the handset and to the socket
marked y on the telephone.
2. Connect the telephone line cord to a network wall socket
and to the K socket on the back of the telephone.
3. Connect the mains adapter
socket and to the DC 9V socket on the telephone.
4. Lift the handset and listen for the dial tone.
Batteries
Four AA alkaline batteries are needed for the call memory and
speakerphone in the event of a power cut. When
is displayed, replace all 4 batteries. Use only AA alkaline
batteries of good quality (not included).
Note!
Before installing or changing the batteries, make sure
that the telephone is not connected to the telephone
network.
1. Remove the battery cover and insert the batteries ensuring
correct battery polarity is observed.
2. Replace the battery cover and reconnect the telephone
line cord.
* Note: Only use the enclosed mains adapter.
English

Installation

to the mains power wall
*
2
BATT. LOW