ThermoFlow Elex Montage- Und Betriebsanweisung, Garantiebedingungen Seite 12

DE GB
Contents
Tools
Unpacking
Check if the unit has been damaged in any way.
Environment
To prevent damage during transport this unit is supplied in robust packaging. Please re-
cycle the packaging where possible.
• 1 instantaneous water heater (Hydrex/Elex 18, 21, 24 kW)
• 1 mounting template
• 1 bag of installation materials, contents:
1 isolating valve (stop valve)

1 nipple

2 gaskets

4 spacers

4 plugs

4 screws




You will require the following tools for the installation:
• Cross-head screwdriver
• Open-ended spanners, 17 and 19 mm
• Teflon tape
• Drill
• 6 mm stone or concrete drilling bits
• Pencil
• Adhesive tape
• Wire strippers



11