Call Functions; Make A Call; Receive Call - Blaupunkt FS 03 Anleitung Für Schnelleinstellung

EN
network. If the device has found the allowed network, it will
display its name and signal strength.
If your device does not find a suitable network, you can only make
an emergency call or access non-network services on your phone.

6. Call functions

6.1. Make a call

When the network service provider name appears on the display,
the phone is ready to make and receive calls.
In Standby mode, press the number keys to enter the number you
want to call, press the right soft key to clear the wrong numbers,
press the left soft key or the dial key to start the call if the specified
number is correct.
To enter an international phone number format, press and hold
the [*] key until "+" international call sign appears on the display.

6.2. Receive call

When an incoming call is alerted to your device if your service
provider supports the number display, the display shows the
caller's number or the caller's name (depending on whether you
have saved it in the phone book).
1. Press the dial key or the left soft key and answer [Answer] to
the incoming call.
2. If Any key responds function is active, [Settings / Call Settings /
Advanced Settings / Answer Mode / Anykey], you can answer any
call using any key except the Right softkey and the End / Off button.
3. When the headset is connected to the unit and [Headset] is
activated [Settings / Call settings / Advanced settings / Answering
mode / Auto answer in headset mode], incoming calls will be
automatically received by your phone after 5 seconds of vibration
or ringing.
4. If you do not want to answer the call, press the End / Off button
6