Power On/Off; Call Functions; Make A Call; Receive Call - Blaupunkt FS 03 Kurzanleitung

EN

5. Power on/off

Press and hold the End / On / Off button to turn the unit on or off.
1. If a SIM card is not inserted, it is defective or not fit correctly, a
warning message will be displayed after switching on the display. Turn
off your device and make sure the SIM card is inserted correctly.
2. If you insert the SIM card into the device, the PIN request and the
phone password are active, the device prompts you for the password
and PIN code and switches to standby mode.
After switching on, the phone automatically searches for the network.
If the device has found the allowed network, it will display its name and
signal strength.
If your device does not find a suitable network, you can only make an
emergency call or access non-network services on your phone.

6. Call functions

6.1. Make a call

When the network service provider name appears on the display, the
phone is ready to make and receive calls.
In Standby mode, press the number keys to enter the number you want
to call, press the right soft key to clear the wrong numbers, press the
left soft key or the dial key to start the call if the specified number is
correct.
To enter an international phone number format, press and hold the [*]
key until "+" international call sign appears on the display.

6.2. Receive call

When an incoming call is alerted to your device if your service provider
supports the number display, the display shows the caller's number or
the caller's name (depending on whether you have saved it in the phone
book).
1. Press the dial key or the left soft key and answer [Answer] to the
incoming call.
2. If Any key responds function is active, [Settings / Call Settings /
Advanced Settings / Answer Mode / Anykey], you can answer any call
using any key except the Right softkey and the End / Off button.
5