Use This Unit; Power On/Off; Make A Call; Receive Call - Blaupunkt BS 02 Kurzanleitung

EN
Do not use a damaged battery. If you are using an appliance under
extreme temperature conditions, the battery will not work
properly and its life span will be reduced. DO NOT throw the
battery into fire, follow local laws and regulations regarding the
disposal of the spent battery.

5. Use this unit

5.1. Power On/Off

Press and hold the End / On-Off button to turn the unit on or off.
1. If a SIM card is not inserted, it is defective or not fit correctly, a
warning message will be displayed after switching on the display.
Turn off your readiness and make sure the SIM card is inserted
correctly.
2. If you insert the SIM card into the device, the PIN request and
the phone password are active, the device prompts you for the
password and PIN code and switches to standby mode.
After switching on, the phone automatically searches for the
network. If the device has found the allowed network, it will
display its name and signal strength.
If your device does not find a suitable network, you can only make
an emergency call or access non-network services on your phone

5.2. Make a call

When the network service provider name appears on the display,
the phone is ready to make and receive calls.
In Standby mode, press the number keys to enter the number you
want to call, press the right soft key to clear the wrong numbers,
press the left soft key or the dial key to start the call if the specified
number is correct.
To enter an international phone number format, press and hold
the [*] key until "+" international call sign appears on the display.

5.3. Receive call

When an incoming call is alerted to your device if your service
7