Maintaining The Battery; Power On/Off; Call Functions; Make A Call - Blaupunkt Sand Kurzanleitung

EN
3. Do not remove the battery during charging.
4. Fill the unit for at least 4 hours before first use. This can
increase the efficiency of the multiple charge and discharge
cycles.

4.6. Maintaining the battery

The device has a rechargeable battery. When not using the
charger, disconnect it from the power source. For more than a
week, do not leave the phone charging. Temperature influences
battery capacity. Battery may need to be cooled or warmed up
before charging. If the battery temperature is lower than 0 °C or
higher than 45 °C, do not charge the battery. Use the battery
according to its intended purpose. Do not short-circuit the
battery terminals. Do not use a damaged battery. If you are using
an appliance under extreme temperature conditions, the battery
will not work properly and its life span will be reduced. DO NOT
throw the battery into fire, follow local laws and regulations
regarding the disposal of the spent battery.

5. Power On/Off

Power on your phone: Hold down the End / On-Off button until
the telephone powers on.
Power off your phone: Hold down the End / On-Off button from
the Home screen.

6. Call functions

6.1. Make a call

When the network service provider name appears on the display,
the phone is ready to make and receive calls.
In Standby mode, press the number keys to enter the number
you want to call, press the right soft key to clear the wrong
numbers, press the left soft key (Options/Call) or the dial key to
start the call if the specified number is correct.
5