Palmer PEPAMPACOUSTIC Bedienungsanleitung Seite 31

8) BLEND
The BLEND control adjusts the ratio of the direct and processed
signals, in the DRY position the unprocessed signal only is present
at the output..
9) VOLUME
The VOLUME control adjusts the overall output level. It is inactive
when the Acoustic Pocket Amp is bypassed.
10) MODE SELECTOR
The MODE switch provides a choice of three precision frequency
contours. Select MAGN for acoustic guitars with magnetic pickups,
the A.G. low frequency roll-off is suitable for eliminating guitar
body noise and violins, and the full range A.B. preset is perfect
for acoustic and upright basses.
NOTE: For accordeons, banjos, bouzoukis or mandolins select A.G.
irrespective of their pickup systems.
11) DI
To double as a DI box the balanced XLR output (21) is switchable
PRE or POST the Acoustic Pocket Amp's circuitry. This switch does
not affect the TO AMP output (22).
12) FOOTSWITCH CONFIGURATION
This assigns the footswitch to activating and bypassing the Acoustic
Pocket Amp or muting the unit while feeding the signal to the THRU
output (20) for silent tuning. The latter is also useful for
noise-free instrument swapping onstage.
31