Unit Specifications - Coltene BioSonic UC125 Benutzerhandbuch

6
B. Staimless Steel Cleaning
Allowable:
• Wash with a clean cloth or rag soaked
with warm water and mild soap or
liquid dish detergent.
• Always clean in the direction of the
original polish lines.
• Always rinse well with clear water (2
or 3 times) after cleaning. Wipe dry
completely.
• Specialized household stainelss steel
cleaner may also be used.
Do Not Use:
• Steel or stainless steel wool or scrapers
to remove stuburn debries.
• Harsh or abrasive cleaners.
• Do not let dirt accumulate.
Avoid:
• Cleaners that contain bleach.
• Products that contain chloride,
flouride, lodide, or bromide.
Chemicals harmful to use in the tank:
Acetophenone Aluminum Chloride
Aluminum Floride Aluminum Sulphate
Aluminum Biflouride Ammonium Chloride
Ammonium Hydroxide Amyl Chloride
Antimony trichloride Aqua Regia
Bromine Calcium Bisulfate
Calcium Bisulfite Calcium Hypochloride
Chloracetic Acid Chloric Acid
Chlorine Anhydrous Copper Chloride
Copper Fluoborate Ethyl Chloride
Ferric Chloride Ferrous Chloride
Ferris Sulfate Fluoboric Acid
Flourine Hydrobromic Acid
Hydrochloric Acid Hydrocyanic Acid
Hydroflouric Acid Hydrofluosilicic Acid
Iodoform Mercuric Chloride
Muriatic Acid Phosphoric (crude)
Sodium Hypochlorite Potassium Chloride
Stannic Chloride Stannous Chloride
Zinc Chloride Sulfuric Acid
C. Inspecting the Power Cord Periodically
check the power cord for damage and
see that the connectors at both ends
of the cord are fully seated.
D. Changing the Fuse
1. Remove the power cord from the wall
outlet first and then from the power
cord receptacle on the rear of the unit.
2. The fuse compartment is located
directly next to the power cord
receptacle. To access, take a small,
flat-headed screwdriver to the tab on
the fuse holder. Apply slight pressure
to release the fuse holder (Fig. 9).
3. Gently remove the fuse from the fuse
holder.
4. Examine the fuse (Fig. 10). If blown,
replace with a fuse that matches the
unit's voltage and current (see section
XIII). If fuse appears to be in good
condition return the unit to your dealer
or Coltène/Whaledent.
5. Plug the power cord into the power
cord receptacle on the rear of the unit.
Then plug the power cord into the wall
receptacle.
XIII. Unit Specifications
Transducers: 2
UC125 unit
100 [100V 50/60 Hz, 137W (max.)]
115 [115V 50/60 Hz, 137W (max.)]
230CE [230V 50/60 Hz, 137W (max.)]
230UK [230V 50/60 Hz, 137W (max.)]
240 [240V 50/60 Hz, 137W (max.)]
Operating
Frequency: 52 kHz
Tank Capacity: 1.25 gallon or 4.75 L
Use Capacity: 1 gallon or 3.78 L
Overall Dimensions: 16.5 x 10.5 x 13.8 in.
42 X 27 X 36 cm
Tank Dimensions: 11.7 x 6.14 x 5 in.
29.7 x 15.6 x 12.7 cm
Fuse Type: 5 x 20 mm Cartridge
Time Lag: IEC 60127-2 Sheet 3
100-115V
230-240V
EMC Class A: Suitable for use in all
establishments other than domestic and
those directly connected to a low-volt-
age power supply network which sup-
plies buildings used for domestic pur-
poses.
XIV. Symbols
Caution, Hot Surface
!
Warning/Caution: Refer to
accompanying documents
Caution: Risk of electric shock
Temperature Limits
Humidity Limits
Proper Disposal Required
XV. Warranty Information
he UC125 has been developed specifi-
T
cally for use in dentistry and intended to
be operated only by dental professionals
in accordance with the instructions con-
tained in this guide. However, notwith-
standing anything contained herein, the
user shall at all times be solely responsi-
ble for determining the suitability of the
product for the intended purpose and
the method of its use. Any guidance on
application technology offered by or on
behalf of the manufacturer or distributor,
whether written, verbal or by demon-
stration, shall not relieve the dental pro-
fessional of his/her obligation to control
the product and to make all pro fessional
judgments regarding its use.
This product has been carefully manufac-
tured and has met stringent quality as-
surance requirements. Our products are
manufactured from new parts or new and
serviceable used parts.
2 Amp
warranty terms apply. If, in normal use, it
1 Amp
is found defective in material or workman-
ship within a period of one year from date
of purchase, it will be repaired at Coltène/
Whaledent's option, or replaced. Tamper-
ing with any of the components,
®
BioSonic UC125
Regardless, our