Setting Up A Connection To A Tablet Or Smartphone; Special Key Assignments - Silvercrest SBT 3.0 A1 Bedienungsanleitung

Setting up a connection to a tablet or smartphone

Before you can use the keyboard, you must pair it with a compatible tablet
or smartphone .
Activate the Bluetooth
♦
carry out a search for Bluetooth
of how to do this is to be found in the operating instructions for your
tablet/smartphone .
♦ Switch the keyboard on using the ON/OFF switch
LED lights up for 2 seconds .
♦ Press the CONNECT button
flashing once a second . The indicator LED
connection is made .
Select the entry SBT 3 .0 A1 from the list of discovered devices on
♦
your tablet/smartphone .
♦ The tablet/smartphone now shows a code for connection . This must
entered on the keyboard and confirmed using the return key (
The indicator LED
NOTE
After about 10 minutes without pressing a button, the keyboard enters
sleep mode to conserve battery power .
► To reactivate the keyboard, press any key and wait for 3 seconds .
After this, you can start using the keyboard again .

Special key assignments

The keys in the top row are reserved for special functions . Corresponding
to the symbols used, they can be used to directly control program features
such as media playback or volume . Depending on the operating system
used, the keys may have slightly different functions . Note that depending
on the version of the operating system, some special keys may not work
with the described function . During the first connection to a tablet/smart-
phone, the keyboard layout of the top row is set to the operating system iOS .
NOTE
Depending on the version of the Android OS, the language of the
physical keyboard must be set before first use (e .g . English) to set
up the keyboard layout you are familiar with . The menu item "physical
keyboard" only appears in the menu Settings/Language & input if the
Bluetooth keyboard has been paired .
■ 8 │
GB
® function on your tablet or smartphone and
® devices . A detailed description
, until the indicator LED
turns off and the connection is made .
. The indicator
starts
keeps flashing until the
SBT 3.0 A1
) .