Epson TM-T88V-DT Benutzerhandbuch Seite 17

Note:
Assign the functions to the power button through the operating system or BIOS.
Forced Termination
If you cannot turn the TM-T88V-DT off using applications or the operating
system, you can execute forced termination as a last resort by pressing the power
button ( ) for approximately 4 seconds. Be careful; when forced termination is
A7
executed, all unsaved data is lost and recovery of the operating system may be
required.
Printer Reset Button
Press this button (See A 6.) with a pointed object (such as a pen) to reset the
printer unit.
Printer Operation
Installing the Roll Paper
Follow the steps below to install the roll paper. If you want to change the paper
width by using the roll paper guide, see "Changing the Paper Width" on page 9.
1. Press the cover open button to open the roll paper cover as shown in
Illustration L.
2. Remove the used roll paper core if any, and insert the roll paper. Illustration
M shows the correct direction of the paper.
3. Pull out some paper, and close the roll paper cover. See Illustration N.
4. Tear off the paper. See Illustration O.
Feeding Paper
Press the Feed button (See A 10.) to feed the paper.
Changing the Paper Width
If a roll paper guide is included with your printer, you can change the paper
width from 80 mm to 58 mm by installing the roll paper guide. Follow the steps
below to change the paper width.
CAUTION:
If you once change the paper width from 80 mm to 58 mm, you cannot
change it back to 80 mm.
You can change the paper width either on the TM-T88V-DT or through the
Network, using the TM-T88V utility.
1. Secure the roll paper guide to the hole (P 21) with the enclosed screw. See
Illustration P.
2. Paste the enclosed 2 strips (Q 23) along the roll paper guide on the bottom of
the roll paper holder. Make sure the space between the top edge of strip and
the groove in the roll paper guide (Q 22) is 0.5 mm or less.
3. Install the roll paper correctly.
4. Close the roll paper cover.
TM-T88V-DT User's Manual 9
English