Victron energy EasySolar 12/1600/70 Anleitung Seite 31

Operating temp. range
Humidity (non condensing):
ENCLOSURE
Material & Colour
Protection category
Battery-connection
PV connection
230 V AC-connection
Weight
Dimensions (hxwxd)
STANDARDS
Safety
Emission / Immunity
Automotive Directive
1) Can be adjusted to 60Hz and to 240V
2) Protection
a. Output short circuit
b. Overload
c. Battery voltage too high
d. Battery voltage too low
e. Temperature too high
f. 230VAC on inverter output
g. Input voltage ripple too high
3) Non linear load, crest factor 3:1
4) At 25 ° C ambient
5) Programmable relay which can be set for general alarm, DC undervoltage or genset start signal function
6a) If more PV power is connected, the controller will limit input power to
720W resp. 1440W.
6b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V.
Common Characteristics
-20 to +50° C (fan assisted cooling)
Three sets of MC4 (PV-ST01) PV connectors
EN 60335-1, EN 60335-2-29, EN 62109
EN55014-1, EN 55014-2, EN 61000-3-3
max 95%
aluminium (blue RAL 5012)
IP21
Battery cables of 1.5 meter
G-ST18i connector
11,7 kg
745 x 214 x 110 mm
2004/104/EC
29