Adjusting The Focus / Diopter Compensation - Leica GEOVID HD-R2700 Anleitung

ADJUSTING THE FOCUS/
DIOPTER ADJUSTMENT
Use the central focusing wheel
for objects at various distances on the Leica
Geovid HD-B/HD-R. The two diopter compensation
rings / allow a focus adjustment of the reticule
6 7
to compensate for individual vision defects when
used without eye glasses.
Follow the instructions below with care. Only then
will you be able to take advantage of the full optical
functionality of the device.
1. Turn both diopter compensation rings to their
zero position.
2. Focus on the distant object with both eyes and
turn the central focusing wheel.
3. Press the main/trigger button
reticule.
5
5 to set the focus
to activate the
1
4
7
4. Once the reticule appears in your fi eld of vision,
turn the diopter compensation ring on the right
(red index) until the reticule on the right is in
clear focus while focusing on the object with
both eyes.
5. With the reticule still activated, but only focusing
on the object with your right eye, use the central
focusing wheel again to fi nalize the image focus
on the right.
6. Next, use the diopter compensation ring
the left to optimize the image focus on the left.
7. The set values are displayed on the diopter
scales / "+" and "-".
7a 6a
Note
When setting the focus on either the left or right,
close the relevantly other eye or cover the relevant
other lens at the front of the binoculars.
EN
4
7
on
6
43