Technical Data; Operation - Wohler DT 310 Bedienungsanleitung

Wöhler DT 310
2.3

Technical Data:

Dimensions:
Weight:
Power:
3.

Operation

3.1 Display
Fig. 3.1: Display
1: Primary Data Screen
2: Secondary Data Screen
3.2 Keypad
3.2.1 POWER key
Press the POWER key to turn the meter on and off.
When the temperature probe is connected, the display shown in
figure 3.1 will appear.
3.2.2 REL/HOLD-Taste
Press the REL/HOLD key to freeze the actual measured values.
Press and hold the REL/HOLD key for more than 2 seconds to set
the primary screen to „000.0". From now on, only the changes rela-
tive to the frozen temperature will be indicated. Press REL/HOLD
again to return to the initial screen.
12
175 x 70 x 33 mm
195 g
4 x AAA size