switel DE382 Bedienungsanleitung Seite 66

Only use the power adapter plug labelled VD060020J / 6 V
DC / 200 mA with the charging station!
2
Only applies for telephone sets with at least two handsets; refer to
Checking the package contents".
Inserting the batteries
Open the battery compartment cover. Insert the batteries in the battery
compartment. Close the battery compartment.
Only use NiMH rechargeable batteries of the type AAA cell,
1.2 V / 500 mAh! Never use standard batteries/primary cells!
Pay attention to correct polarity.
Charging the batteries
Before the handset is used for the first time, insert it in the
base station/charging station for at least 16 hours.
The handset warms up during the charging process. This is normal and
does not represent a risk. Do not charge the handset with charging units
from other manufacturers. The battery charge status is indicated in the
display. When the battery charge has reached its lower limit, the battery
icon n flashes in the display and an acoustic alarm signal is issued (if
the option is switched on / menu item
HS SETTINGS > TONE SETUP > BATTERY TONE ). It indicates approx.
10 minutes call time is remaining.
Setting the time and date on the handset
When started up for the first time, the handset does not indicate the cor-
rect time (e.g. for entries in the call list/answering machine). The date and
time are set using the menu option HS SETTINGS > DATE & TIME.
Setting the display language
The display language can be set to one of the 13 different languages
available. When delivered, the language is set to Deutsch" (German).
Change the setting using the menu option HS SETTINGS > LANGUAGE.
Automatic answering
If the Auto Answer function is activated (default state on delivery), a call is
automatically taken on removing the handset from the base station. The
automatic answering function is activate/deactivated using the menu op-
tion HS SETTINGS > AUTO ANSWER.
5