Climadiff CLE7 Gebrauchsanweisung Seite 17

Important information concerning installation
• To ensure proper electrical connection, follow the recommendations given in the present manual.
• Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the packaging.
• It is recommended that the appliance be allowed to settle for at least 4 hours before connecting the
electrical power supply, so that the compressor fluid feed is correct.
• Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe the
installation recommendations provided.
• In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls or
with any hot element (compressor, condenser). Observe the installation recommendations.
• The appliance should not be placed close to radiators or cooking hot plates or gas rings.
• Check that electrical sockets remain accessible when the appliance is installed.
Power saving
To limit the electricity consumption of your appliance:
Install it in an appropriate place (see "Installation instructions").
Leave the doors open as little time as possible.
To ensure that the appliance operates properly, clean the condenser regularly (see
"Maintenance").
Regularly inspect the door seals and ensure that they are still closing properly. If this is not the
case, contact your after-sales service.
Trouble shooting
• Any electrical work should be carried out by a qualified and skilled technician.
• The appliance should be repaired by an accredited repair centre, using only manufacturer's original
spare parts.
The appliance is designed for home use only. The manufacturer declines any liability whatsoever in the
case of other use.
Warning: do not use mechanical devices or other
means to accelerate the defrosting process, other
than those recommended by the manufacturer.
Warning: keep ventilation openings in the appliance
enclosure or in the structure clear of obstruction.
17