Kenwood FHM15 Bedienungsanleitungen Seite 7

key
processor
power unit
1
detachable drive shaft
2
processor bowl
3
lid
4
feed tube
5
pushers
6
safety interlocks
7
cord storage (at back)
8
high speed light

speed/pulse control
b
low speed light
b
weighing function/count up timer
kg/lb button
b
ZERO button
b
display screen
b
weighing tray
b
Processor attachments
Not all the attachments listed below will be included with your
food processor model. Attachments are dependent upon the
model variant. For more information or to order additional
attachments refer to the "service and customer care" section.
blender
(if supplied)
blade assembly
bq
sealing ring
b
goblet
b
filler cap
b
lid
c
metal mixing bowl
mixing bowl lid
c
mixing bowl with in-bowl drive
c
dough tool
c
drive head
c
whisk
c
creaming beater
cq
creaming beater wiper
c
knife blade
c
max capacity disc
c
plate carrier

4mm slicing plate (if supplied)

2mm slicing plate (if supplied)

4mm grating plate (if supplied)

2mm grating plate (if supplied)

extra fine grating plate (if supplied)

fine julienne plate (if supplied)
q
French fry plate (if supplied)

citrus juicer (if supplied)

attachment storage box (if supplied)

(if supplied)
to use your food processor
1 Fit the detachable drive shaft onto the power unit
2 Then fit the bowl by placing the handle towards the right
hand side and turn forward
Always fit the bowl and attachment onto the processor
l
before adding ingredients.
3 Fit the lid ensuring the top of the drive shaft/tool locates into
the centre of the lid
The processor will not operate if the bowl or lid
l
are not fitted correctly into the interlock. Check
that the feed tube and bowl handle are situated
to the right hand front corner.
4 Plug in and then turn the speed control to the 'ON' position.
The weighing display screen will come on and either the low
speed light or high speed light will illuminate depending on
which bowl/blender is fitted. If no bowl/blender fitted both
speed lights will remain off.
Speed Control – manually select the required speed (refer to
the recommended speed chart).
Pulse – use the pulse (P) for short bursts. The pulse will
operate for as long as the control is held in position.
5 At the end of processing turn the speed control to the OFF
'O' position.
Always switch off and unplug before removing the
l
lid.
important
Your processor is not suitable for crushing or grinding coffee
l
beans, or converting granulated sugar to caster sugar.
Light Function/
Attachments
Low speed Metal mixing
bowl and tools
High speed Processor
bowl and
attachments/
tools or
Blender
4
until it locks.
2
.
3
No Lights Light
Flashing
• No bowl or Indicates one of
blender fitted the following:
or interlocked • Lid or bowl
to power unit.
• Power unit not
plugged in.
• To reset – turn
• Speed control
not turned to
'ON' position.
• Unit left
• The power
.
1
removed or
unlocked
whilst speed
selected.
to 'O', then
turn to 'ON'
and reselect a
speed.
plugged in for
more than 30
minutes.
unit will not
operate until
the speed
control is
turned to 'O'
position and
turned back
to the 'ON'
postion.