Removal From Service, Demounting, Disassembly; Storage; Disposal - WDT AVG 0160 Bedienungsanleitung

AVG 0160
ATTENTION!
Prior to starting up the Strip and Twist Machine AVG 0160 you have to check the
condition of the connecting cables. The cables must not show any damage. Damages
have to be repaired before continuing to work with the machine.
In the event of a problem our customer service personnel will be able to help you.
Service address
WDT ToolTech AG
Eichenstraße 6
CH-8808 Pfäffikon (SZ)
Schweiz
Telephone:
+41 (0) 55 417 00 30
Please have the following information ready when you contact service.
- Machine Type
- Machine serial number
12

Removal from Service, Demounting, Disassembly

DANGER!
Before starting maintenance, disassembly or repair work, the Strip and Twist Machine
AVG 0160 must be disconnected from power supply. Touching live parts can cause
danger of electrocution with fatal consequences!
CAUTION!
When working with the Strip and Twist Machine AVG 0160, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the Strip and Twist
Machine AVG 0160.
Maintenance work may be performed only by authorized and properly trained
personnel.
The Strip and Twist Machine AVG 0160 can only be removed from service with
mounted safety guards.
13

Storage

Store the machine in the original box at room temperature.
14

Disposal

For the disposal of the Strip and Twist Machine AVG 0160, send it back to WDT ToolTech.
Page 38 / 62
Version 05/10