Telefunken T42A857FHD Bedienungsanleitung Seite 107

Select your Country , Language and Text
language by using " " or " " and " " or " "
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:
After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Cable Installation
Select Cable Installation line in the Installation
menu and use OK button to view the menu
contents:
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item
is highlighted.
The following message appears on the
screen:
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 105 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 105
Highlight Yes or No by using " " or " " buttons
and press OK button to confirm. If Yes is
selected, automatic search starts.
Selecting No cancels automatic search.
You can select frequency ranges from this
screen. For highlighting the lines you see, use
" " or " " button. You can enter the frequency
range manually by using the numeric buttons
on the remote control.
• After this operation, you can set Search Step
as 8000 KHz or 1000 KHz. If you select 1000
KHz, the Tv will perform search process in
a detailed way. Searching duration will thus
increase accordingly. When fi nished, press
OK button to start automatic search.
When finished, press OK button to start
automatic search. Automatic searching screen
will be displayed during the process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:
Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:
English - 105 -
05.10.2009 20:13:00 05.10.2009 20:13:00