Telefunken T42A857FHD Bedienungsanleitung Seite 103

day and searches for any new information which
may be broadcast and will download this to
your receiver automatically. This operation will
normally take approximately 30 minutes. If you
have an important recording to be carried out
at 3.00 A.M. and you do not want to interrupt
it, disable auto OAD search by performing the
following:
• Press "MENU" button and using the " " or
" " buttons to choose Setup and press the
OK button.
• Highlight Confi guration menu with " " or " "
keys and press OK .
• Use " " or " " buttons to choose "RECEIVER
UPGRADE" and press OK button.
• Using the" " or " " button change "Automatic
scanning" from Enabled to Disabled.
• Highlight "Scan for upgrade" menu with "
" or " " keys and pres OK to commence
upgrade.
• After the search progress is completed, the
message " Completed searching for upgrade.
No new software was found" appears on the
screen if no new software is found.
• Do not forget to re enable the automatic OAD
function after you have made your recording
by repeating the above instructions but this
time selecting ENABLE.
Note: Your TV may start in First Time Installation mode
after OAD update.
Parental Control
Use " " or " " buttons to go to Parental Lock
option. Press OK button to enter the menu.
A dialog box asking for the lock key will be
displayed. The key is set to "0000" initially. Enter
PIN. If it is incorrect, "Wrong Pin" OSD will be
02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 101 02_[GB]_SSM_MB35_42857W_1900UK_IDTV_TC_PVR_100HZ_SILVER1_10065463_50156645.indd 101
displayed. If it is correct, the Parental Control
menu will be displayed:
Maturity Lock (*)
(*) If you set Country option as UK in the fi rst
time installation, Maturity Lock option will not
be visible. This setting is available only for EU
countries.
When set, this option gets the maturity information
from the broadcast and if this maturity level is
disabled, does not show video-audio.
Menu Lock
In menu lock you can set locking for all menus,
or the Installation Menu to restrict access to
these menus. If the menu lock is disabled, there
will be free access to the menu system. Use " "
or " " buttons to go to Menu Lock option. Use "
" or " " buttons to choose Menu Lock Mode.
DISABLED : All menus are unlocked.
ALL MENUS : All Menus are accessible only
with the correct lock key. So the user cannot
add, delete, rename, channels, cannot set
timers.
INSTALLATION MENU : Installation menu is
locked.So the user can't add channels. Changes
will be updated after exiting 'Configuration
Menu'.
Set PIN
Use " " or " " buttons to go to "Set PIN" option.
Press OK to display the "Set PIN" window. Use
numeric buttons to enter new pin number you
will need to input your new pin a second time
for verifi cation purposes. If both pin numbers
are four digits long and the same, the pin will
be changed. The factory default pin number is
0000, if you change the pin number make sure
you write it down and keep it safe.
English - 101 -
05.10.2009 20:12:58 05.10.2009 20:12:58