Basic Menu Functions - Conrad 75 16 59 Bedienungsanleitung

• If desired, you can connect a VGA source (for example the VGA output from your
graphics card) to the „VGA input" (13)
• You can also connect an audio source to the „AUDIO inputs" (10, 15).
• Connect the European plug cable to the power supply unit. Plug the European
plug into a normal domestic mains socket (230 V/AC 50 Hz).
• Press the button „ON/OFF" (5) on the monitor or the button „POWER"
remote control. After this, the LED „POWER" (9) lights up.
Headphones can be connected to the „headphone output" (17).
The speakers on the back will then be deactivated.

8. Basic Menu Functions

• Press the button „MENU" (2) on the monitor or the button „MENU"
remote control to call the main menu. The following display appears on the
monitor:
• Press the button „CH+" (7) or „CH-" (6) on the monitor or the button
the remote control, to move the cursor to the desired menu.
• Press the button „VOL+" (4) or „VOL-" (3) on the monitor or the button
on the remote control, to call the the desired menu or to set values.
• Press the button „MENU" (2) on the monitor or the button
remote control to leave the main menu.
34
on the
on the
or on
or
or on the