Introduction - Cameo PIXBAR DTW PRO Bedienungsanleitung

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.

INTRODUCTION

LED PIX BAR DIM TO WARM
CLPIXBARDTWPRO
CONTROL FUNCTIONS
1-channel, 2-channel 3-channel DIR, 3-channel CCT, 5-channel sound-to-light, 7-channel, 12-channel PAT, 12-channel SUN, 36-channel
and 45-channel DMX control
Master/Slave operation
Standalone operation
FEATURES
DMX-512. 12 x 10 W 3in1 LEDs (amber, warm white, cool white). Colour temperature from 1600 K to 6800 K. Emulation of a halogen spotlight
by "dim to warm" technology. 16-bit dimmer. 4 dimmer curves. Strobe. Operating voltage 100–240 V AC. Power consumption 130 W.
The spotlight features the RDM standard (remote device management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.