Product Information - Wilo Plavis 011-C Einbau- Und Betriebsanleitung

1. General
See start of document.
2. Safety
See start of document.
3. Transport and interim storage
When you receive the equipment, check that it
has not been damaged during transport. If you
notice any defects, take all necessary measures
with the carrier in the time provided.
WARNING! The environment may cause damage.
If the equipment delivered must be installed
subsequently, store it in a dry place and protect it
from shock and any other effects (humidity, frost,
etc.).
Transport and storage temperatures: -30 °C to
+60 °C.
Handle the product with care so as not to dam-
age it prior to installation.
4. Intended use
The Wilo-Plavis ...-C product is designed for pump-
ing condensates emitted by the following systems:
• Boiler
• Air-conditioning system
• Cooling and refrigeration system
• Air dehumidification
The product is suitable for pumping collected
condensates that cannot be sent towards the
drains or drained from the building by the natural
slope.
DANGER! Risk of explosion!
Do not use this pump to convey flammable or
explosive liquids.
WARNING!
The condensates from boilers are aggressive due
to their acidity. Always wear gloves and protec-
tive glasses for maintenance work.
The condensates from boilers must be processed
(potentially neutralised) in compliance with the
local regulations before being sent to the drains.

5. Product information

5.1 Technical data
Designation
Supply voltage
Frequency
Supply cable
Alarm cable
Power consumption
Rated current
Protection class
Ambient temperature
Alarm relay contact
Delivery head
Admissible fluid
Admissible fluid temperature
Sound-pressure level
Dimensions (L x W)
Tank volume
Net weight (± 10 %)
WILO SE 09/2016
5.2 Scope of delivery
• Wilo-Plavis ...-C
• + 2 fastening screws Ø 4
• + 5 m drainage pipe Ø 8 x 11 (based on the model)
• + Installation and operating instructions (fig. 2)
6. Description and function
6.1 Description (fig. 3, 4)
1 Pump set
2 Tank overflow safety level (based on the model)
3 Tank cover
4 Hatch (based on the model)
5 Plug adapter (based on the model)
6 Power supply
7 Alarm cable (based on the model)
8 Non-return valve
9 Tank
10 Low-level probes
11 High-level probes
12 Alarm probe (based on the model)
13 Alarm indicator (based on the model)
A Suction
B Drainage
6.2 Function
• The condensates are collected in the tank
• The level of liquid is automatically controlled by
the electronic card
• The pump starts when the liquid level reaches
the high-level probe, and stops when the liquid
level has descended to the low-level probe
• The condensates are drained away through the
drainage piping
• The product is equipped with an alarm probe in
case of defect (based on the model). This alarm
probe activates the alarm relay that may be con-
nected via the alarm cable
7. Installation and electrical connection
WARNING! Physical injuries
The applicable regulations for the prevention of
accidents must be complied with.
WARNING! Risk of electric shock
Any danger posed by electricity must be eliminated.
Wilo-Plavis 011-C Wilo-Plavis 013-C
1 ~ 100-240 Vac
-
from + 5 °C to + 40 °C
-
from + 5 °C to + 60 °C
< 40 dBA at 1 m
152 x 116 mm 210 x 123 mm
0.7 L
700 gr
Wilo-Plavis 015-C
50/60 Hz
1.5 m
1.5 m
< 20 W
0.2 A
IP X4
42 V rms 1A
Max 4 m
pH > 2.5
275 x 129 mm
1.1 L 1.6 L
750 gr 1,000 gr
English
23