Vitek VT-1514 BK Betriebsanweisung Seite 8

ENGLISH
(23, 24 and 25) on the control panel will start
flashing.
•
When the control buttons stop flashing, press
the espresso button (23) twice.
•
Repeat the boiler cleaning procedure with
small intervals till there is no citric acid solu-
tion in the tank.
• After finishing of the cleaning process fill the
tank (16) with water and repeat this proce-
dure 2-3 times to wash off the rest of citric
acid or descaling reagent.
Note:
•
To remove scale you can use special scale
removers, strictly following the instructions
on their usage.
Cleaning
• Cleaning the filters (20, 21): you can wash
the filters in a dish washing machine. If the
openings are blocked with the ground cof-
Failure
The unit cannot be
switched on
Water leaks from the
lower part of the unit
Coffee leakage from
the filter holder
Coffee
has a foreign smell
Steam doesn't froth
the milk
All indicators and
control buttons
illumination flash.
VT-1514_IM.indd 8
Cause
No voltage in the socket.
The plug is not completely inserted
into the socket.
The water tray is overfilled.
Loose connection of filter and
boiler gasket, ground coffee got
on the edges of the filter.
Wrong process of scale removal in
the boiler
Improper storage of coffee
Low temperature of the outgoing
steam.
The container is too big or of
improper size.
You used skimmed milk
The water tank (16) is empty.
fee remnants, you can clean the filters with a
small brush.
• Wipe the coffee maker body with a soft damp
cloth. Do not use metal brushes or abrasives.
•
Do not immerse the coffee maker body into
water or other liquids.
•
Wash the removable parts of the coffee
maker with warm water and a soft detergent.
Drip trays
•
Remove the lid from the tray, remove the tray
and pour out water, put the tray back to its
place, put the grid on the tray.
•
If necessary, wash the trays and the lids with
water and soft detergent, then rinse and dry.
Troubleshooting
Technical specifications
Solution
Make sure that the socket is operating.
Check whether the plug is completely
inserted into the socket.
Pour out water from the tray.
Clean the edges of the filter.
See chapters
«Before using the unit», «Descaling» and
repeat described process several times.
Use fresh ground coffee.
Keep coffee in a dry cool place.
Froth milk only after the illumination of
control buttons stops flashing.
Use narrow high container for frothed
milk.
Use only whole milk with fat content
4-6%.
Fill the water tank (16) with water.
8
07.12.2012 9:29:24