Safety Information - Siko AP05 Zusatz Zur Originalmontageanleitung

AP05-SW04+SW05
Documentation
1 Documentation
There are further relevant documents - see list in original installation ins-
truction.
These documents can also be downloaded at
com/p/ap05".

2 Safety information

Saftey information of original installation instruction apply.
3 Commissioning
Display and control keys
The position indicator has a two-line display with special characters and
three control keys. The position indicator is configured and controlled via
the keys. The LEDs
(factory setting), the 1st line displays the actual value and the 2nd line
the set point. With a critical battery status, the special sign
with an empty battery,
surement switched on, the incremental measurement symbol
displayed.
Fig. 1: Operating elements
Manual setup operation
After applying supply voltage, the position indicator will be on the upper-
most level of the menu structure (default/delivery state).
AP05-SW04+SW05 · Date 01.03.2018 · Art. No. 89533 · Mod. status 49/18
serves for positioning monitoring. In the basic state
1
glows permanently. With incremental mea-
1
English
"http://www.siko-global.
Position monitoring LEDs
1
7
blinks,
is