Remote Control
The optional remote control system allows operation of all the functions on the SETO
POWER LED from a distance of up to 100 metres. In addition as each command is
given the LED on the remote will show the status of the SETO POWER LED battery,
the battery status can also be seen without changing a function by pressing the top two
buttons on the remote simultaneously.
As a button is pressed you will hear a bleep from the remote, then a second one as confirmation
that the action has been received and processed.
The remote control system uses mesh networking technology to control multiple SETO POWER
LED units, as each unit receives a command it re-broadcasts it to other units thus extending the
effective range and eliminating failed attempts.
Emergency System
Using the same technology as the remote control this simple plug in the wall (or
any 110V to 240V AC generator power source) will monitor the power then auto-
matically broadcast a signal to all SETO POWER LED's to switch them on in a
mains failure situation. This simple but effective solution makes a very versatile,
wireless portable emergency lighting system.
Storage
If the SETO POWER LED is to be left unused for an extended period of time or the unit is to be
put into storage we advise you disconnect the light head plug from the battery unit to prevent any
accidental switch on. The unit can then be stored up to 6 months without having to recharge it. We
then advise the battery unit be fully charged up before use to maintain its performance.
Maintenance
Your SETO POWER LED should need little or no maintenance during its life span other than peri-
odic cleaning of the exterior surfaces where we suggest using a light detergent and water to ponge
off any dirt deposits. Should you encounter a problem then please contact us for technical assis-
tance. We suggest the unit be returned to us for any problems that can't be rectified by telephone.
Please note there are no user serviceable parts inside and that a competent person must carry out
any repairs.
Recycling and the environment
This product is powered by a lead-acid battery and must not be disposed with the regular household
waste but has to be delivered at a collection point for the recycling of electrical and electronic equip-
ment. The symbol on the product, the manual instruction or the package indicates it.
With the recovery of used products you make an important contribution to protect our environment.
Please ask the local authorities for the appropriate disposal site.
24