Emergency System; On Board Charging; Construction; Operation - Quick Start - Setolite SETO POWER LED Gebrauchsanleitung

Emergency System

On board charging

An optional built in charging system can be added to allow full automatic charging from any 12

Construction

The SETO POWER LED has been constructed using carefully chosen materials to produce a tough
long lasting product for the professional user.
Operation – Quick start
Although the SETO POWER LED is packed full of features it is still simple to use.
When the unit is packed down in torch/storage mode the (on/off) switch is recessed to
prevent accidental switch on, yet still accessible to the user when needed.
Press once to switch on and again for off. Whenever the unit is first switched on it will
default to the 100% brightness setting regardless of how the unit was last used. At
switch on you will hear a bleep from the unit to signal all is well, the battery status LED
close to the on/off switch will illuminate to show the units state of charge.
Always remember to put your SETO POWER LED on charge after use to prolong the life of the high
capacity rechargeable battery.
18
Using the same technology as that employed in the remote control system the
optional emergency system can be configured to detect a failure in a building
or site voltage supply (permanent mains or generator) automatically signal any
number of SETO POWER LED units to come on and provide a wireless emer-
gency lighting system adding new levels of safety and convenience to the work
environment.
or 24 volt vehicle, a single multi-colour LED gives full indication of the char-
ge process. In addition the charger benefits from a vehicle battery protect
mode to prevent over discharge of the vehicles primary battery. With the
in built charger it allows the use of a temperature monitor to accurately
measure and control the charge to the high performance cyclic battery
used. This means that whether the unit is charged in a hot or cold environ-
ment the battery is always charged to 100% to stop the reduced effects on
performance associated with less advanced charging systems.