Run Times; Charging Your Seto Power Led - Setolite SETO POWER LED Gebrauchsanleitung

Run Times

Es gibt sechs Helligkeitsstufen: 8%, 25%, 50%, 75%, 100% und 125%. Diese dienen hauptsächlich
dazu längere Laufzeiten der Batterie zu ermöglichen, wenn diese Option benötigt wird. Im nachfol-
genden finden sie die (ungefähren) Laufzeiten:
8% (Find me mode)
100% (Default mode on switch-on)
125% (Boost Mode)
* The 125% setting gives a 10-minute boost of light and will then drop back to 100% automatically.
Specific run times can be programmed in at manufacture, please contact SETOLITE Lichttechnik
for more information.
Charging your SETO Remote LED Power90
Whichever SETO POWER LED battery charger you have selected to recharge your SPOWER LED
will be designed to be left connected indefinitely to the battery unit so your lighting product is always
topped up and ready for use. Your SPOWER LED can be charged and run at the same; this may be
useful when using the light as an emergency back up light for if or when used for a short period of
time, leaving the unit in a semi or fully discharged state will have an adverse effect on the longevity
of the battery life. All the chargers supplied show a combination of lights to indicate each point of
the charging process, for more details on charging please see the separate instructions included
with the charger.
Note always charge your SETO POWER LED in a dry well ventilated environment away from
minors.
Plug charger into spare
socket on rear of unit
22
Brightness
25%
50%
75%
Duration
Approx. 5 days
Approx. 33 hours
Approx. 16 hours
Approx. 11 hours
Approx. 8 hours
* See below