Herunterladen Inhalt Inhalt Diese Seite drucken

Hendi 212004 Gebrauchsanweisung Seite 5

Crepe maker
Vorschau ausblenden Andere Handbücher für 212004:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
• Do not use hard utensils to hit the heating plate surface. Do not use water for washing
and water jet flush directly with water as the parts will get wet and electric shock might
be resulted.
• Take care when operating the appliance, as rings, watches and similar objects worn by
the user could get hot when in close proximity to the heating surface.
• Caution! Securely route the power cord if necessary in order to prevent unintentional
pulling or contact with the heating surface.
• Clean the appliance after each use for the reason of hygiene.
• WARNING: Allow completely cool down before cleaning and storage.
Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Main parts of the appliance
1
2
1. Temperature control
2. Power indicator
3. Dripping tray
4. Wooden spreader
Preparation before using for the first time
• Remove all protective packaging and wrapping.
Make sure no packaging debris remain on the
appliance.
• Check for completeness (1 dripping tray and 1
wooden spreader included) and any transport
damage. In case of damages or incomplete de-
livery, please contact supplier (See --- > Warranty
page).
• Keep the packaging for storing your appliance
when not in use for an extended period of time.
• Ensure there is enough clearance around the ap-
pliance. Place the appliance in a well-ventilated
area.
3
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
4
• Connect the power plug to a suitable electrical
wall outlet.
• The power indicator (2) will light up in green.
Switch ON the appliance by setting the temper-
ature control (1) clockwise to MAX (250°C) for dry
running without food for about 15 ~ 20 minutes.
This is to remove all residues during the manu-
facturing process.
• Let the appliance cool down completely. Clean it
before using it for baking crepe. (See ==> Clean-
ing and Maintenance)
EN
5

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis