Pkm 9090-2H Bedienungsanleitung Seite 22

A Hood
B Base chimney
C Telescopic chimney
D Mounting rail
E Flat bar
F Hob
Installation steps
WARNING! Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
WARNING! Do not damage the wiring in the wall while drilling
Screws for wall mounting
1 Installation bracket 2 pcs. 4*40
2 Flat bar 2 pcs. 4*30
3 Suspension device 3 pcs. 4*40
Installation steps
1. Install the 2 semi-circular valve flaps (a/b) into the air-outlet-opening of the
appliance. Insert the axles of the valve flaps into the relevant openings (1b) by
bending them carefully (1a). Both valve flaps shall open outwards (2).
Fixing the chimney to →
4 Installation bracket 2 pcs. 4*8
5 Flat bar 2 pcs. 4*8
6 Hood 2 pcs. 4*8
22