Setting The Light Sensitivity; Setting The Lighting Duration Of The Device; Error Analysis - Powerfix IAN 78526 Bedienungsanleitung

Start-up / Error Analysis
Turn the control knob SENS
order to reduce the sensor range
Turn the control knob SENS
in order to increase the sensor range
Setting the light sensitivity (Ill. D)
Turn the control knob LUX
The sensor
does not react to light values below 3 Lux.
Turn the control knob LUX
The sensor
Note: the intermediate range is for various light
values.
Setting the lighting duration
of the device (Ill. D)
Note: the lighting duration of the device can be set from
min. 10 sec. to max 7 min.
Turn the contol knob TIME
order to decrease the lighting duration of the device.
Turn the control knob TIME
order to increase the lighting duration of the device.
Note: The lighting duration is always calculated based on
the respective last movement recorded by the sensor

Error Analysis

Note: The function of the device is dependent on on the
outside temperature. Functional errors may occur due to
strong temperature fluctuations.
Problem
The connected
lighting does
not illuminate.
10 GB/IE
is in the night operation mode and
1
is in the night and day operation mode.
1
Solution
a) Check to ensure that the elec-
trical cord and the device are
connected correctly.
b) Replace defective lighting
material.
c) Check the setting of the light
sensitivity.
in the direction „-" in
6
to 5 m.
1
in the direction „+"
6
.
1
in the direction „ ".
8
in the direction „ ".
8
in the direction „-" in
7
in the direction „+" in
7
.
1