Using The Heater - Rusta 906512250101 Gebrauchsanweisung

USING THE HEATER

POWER AND HEAT SETTINGS
1
0
THERMOSTAT
MIN MAX
OSCILLATION
TIP-OVER SWITCH
Your heater is designed to automatically shut the heater off when tipped forward or
backward. The unit will automatically turn on once it is returned to its normal upright position.
Do not use on thick and long pile carpets, as the heater may not work, due to the tip-over
switch not being activated.
2
0 OFF
Fan only operation
1 LOW heat setting (750W)
2 HIGH heat setting (1500W)
Set the thermostat to "MAX" and leave the appliance to operate
until the desired room temperature is reached. Turn the
thermostat anticlockwise until the appliance switches off with
an audible "click".
This set temperature will be kept almost constant by the
appliance switching on and off automatically.
Please note that the appliance does not switch on unless the
thermostat setting is higher than the room temperature.
Turn the oscillation function on and off using the oscillation
switch.
0 – OSCILLATION OFF
1 – OSCILLATION ON
7