Toshiba RBC-ASC11E Gebrauchsanweisung Seite 5

4 Menu button
It is used for the selection of the running mode, fan speed and wind direction.
Press of the button each time, then it will switch in the following order.
• In different modes of the indoor unit, the selection of fan speed or wind direction may be
omitted.
■ Indication icon
All the icons shown on the display are for illustrative purposes only. Cooling only model do not show
heating-related icons. When "SETTING" flickers, the operation will not be accepted.
1 Running mode indication icon
Indicate the selected running mode.
2 Central control indication icon
It will be displayed when the air conditioner
is centrally controlled and used by a central
remote controller and other central control
devices. If the central control prohibits using
the remote controller,
pressing the ON/OFF, mode or temperature
button on the remote controller, indicating that
these buttons do not work. (The settings that
can be configured on the remote controller will
vary depending on the central control mode.
For details, please read the Owner's Manual of
the central remote controller.)
3 Setting indication icon
Indicate that the system is checking automatically
after the circuit breaker has been disconnected
or other conditions have occurred.
will flash when
-3-
4 Repair indication icon
Display when performing an inspection or the
protective device is running.
5 Test run indication icon
Display during the test run period.
6 Temperature setting indication icon
Display the selected setting temperature.
7 Wind direction indication icon
Display when the louver moves up and down.
8 Louver position indication icon
Indicate the louver position.
9 Louver locking indication icon
Display when there is a louver locking device.
(4-Way cassette type only)