Deleting Dmx Settings For Pan/Tilt Of A Scanner; Deleting All Dmx Settings; Indicating Dmx Channels Of A Scanner - EuroLite DMX Scan Control 192 MK2 Bedienungsanleitung

Deleting DMX Settings for Pan/Tilt of a Scanner

Deleting all DMX Settings

Indicating DMX Channels of a Scanner

1. Activate the Assign or Reverse mode with the buttons MODE and FINE.
3. Use one of the SCANNERS buttons to select the scanner you want to delete.
4. Simultaneously press AUTO/DEL and MODE. All LEDs will flash briefly to
confirm the deleting.
1. Switch off the device.
2. Simultaneously press AUTO/DEL and MODE and turn the device on again.
All LEDs will flash briefly to confirm the deleting. All assigned or reversed
channels are reset.
1. Simultaneously press MODE and FINE, the LED ASSIGN is lit. If you press
both buttons again the LED ASSIGN goes out and the LED REVERSE lights
up.
2. By pressing the SCANNERS buttons you can let the display indicate the Pan
and Tilt channels of the respective scanner.
38/56 00116794, Version 1.0