Deleting All Chases; Calling Scenes; Manual Modus; Automatic Mode - EuroLite DMX Scan Control 192 MK2 Bedienungsanleitung

Deleting All Chases

Calling Scenes

Illumination scenes can be called manually or played time-controlled and sound-controlled. As a basic
setting, the manual mode is activated. The LEDs MANUAL, AUTO and MUSIC indicate the current setting.

Manual Modus

Automatic Mode

In automatic mode, the scenes stored in a memory bank will be played time-controlled in an endless loop.
3. Hold down AUTO/DEL while you press CHASE again. All LEDs will flash
three times briefly, thus indicating that the chase has been deleted.
1. Switch off the controller.
2. Keep the two buttons AUTO/DEL and BANK DOWN pressed simultaneously
and switch on the controller. After 2 seconds, all LEDs of the controller flash
three times to confirm the deleting procedure. All programmed chases will
irrevocably be lost. The individual scenes and memory banks are still
maintained.
1. As soon as you turn on the device, it is automatically in manual mode. If
necessary, switch to manual mode with the button AUTO/DEL.
2. Use BANK UP/DOWN to select the bank containing the desired scenes.
3. Press the corresponding SCENES button to select the desired scene.
1. Press AUTO/DEL to enable auto mode. The LED AUTO lights up and
indicates the activation.
47/56 00116794, Version 1.0