Initial Operation; Spare Parts - STIEBEL ELTRON FB 1 SL Gebrauchs- Und Montageanweisung

knock-out points, 1 wall mount upper part
knock-out point).
– Feed the connecting cable through the ca-
ble bushings and cable seal (16).
– N fasten the wall mount with suitable fas-
tening material through the two knock-out
points a .
The wall mount includes appropriate
knock-out points b for replacing an older
remote control.
... for assembly on concealed switchbox
– feed the connecting cable through the cable
seal (16).
– N fasten the wall mount with the screws
supplied through the knock-out points
appropriate to the switchboxes.
2.5.3 Remote control electrical
connection
– Strip the connecting cable for 35 mm and
insulate the cable ends for 6 mm.
I
17
K
7
13
N O
a
b
b
c
c
a
– O insert the terminal strip on the connec-
tors in the wall mount lower part and posi-
tion the wall mount upper part in parking
position.
– P fasten the connecting cable to the ter-
minal strip, noting the sequence of terminal
rows (1, 2, 3, 4) in the connection module.
– Slot the wall mount upper part into the lower
part at the top, fold down and screw tight.
Information on:
„Environment, recycling, after-sales
service and guarantee" see Instantaneous
Water Heater Operating and Installation In-
structions.
c
2
13

Initial Operation

for the qualifi ed installer
For starting up the instantaneous
water heater DHE .. SL(i) with the
remote control FB 1 SL, please note the
Instantaneous Water Heater Operating and
Installation Instructions:
– „Completion of installation"
– „Initial Operation".

Spare Parts

excerpt from the Parts List
Nomenclature
Cover Panel (1) . . . . . . . . . . . . . . . . . .27 07 77
Wall mount (2). . . . . . . . . . . . . . . . . . .27 07 78
Connection module (3) . . . . . . . . . . .27 07 79
J
L
P
Order No.
14
M
16
15
7