English; Technical Data; Ec Declaration Of Conformity - DeWalt DW071 Bedienungsanleitung

E N G L I S H
ROTARY LASER DW071
Congratulations!
You have chosen a D
E
Years of experience, thorough product development
and innovation make D
reliable partners for professional power tool users.

Technical data

Voltage
Battery size
Rotary speed
Laser class
Protection class
Operating temperature
Receptacle thread
Weight
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Fire hazard.
EC-Declaration of conformity
DW071
D WALT declares that these tools have been
E
designed in compliance with: 73/23/EEC,
98/37/EEC, 89/336/EEC, EN 60335, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3,
EN 60825-1 & EN 61010-1.
For more information, please contact D
address below or refer to the back of the manual.
L (sound pressure)
pA
Weighted RMS acceleration value
* at the operator's ear
28
WALT power tool.
WALT one of the most
E
DW071
V 4.5
3 x LR14 (D)
-1
min 0 - 600
II
IP54
°C
0 - 40
5/8" x 11
kg 3.0
WALT at the
E
DW071
dB(A)* < 70
2
m/s < 2.5
TUV Rheinland of North America
File Number E2071161.02-A1
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
Safety instructions
When using power tools, always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and
personal injury.
Read all of this manual carefully before operating
the tool. Also refer to the manual of any power
tool that will be used with this tool.
Save this manual for future reference.
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose power tools to humidity.
Keep work area well lit. Do not use power tools
in the presence of flammable liquids or gases.
3 Guard against electric shock
Prevent body contact with earthed surfaces
(e.g. pipes, radiators, cookers and refrigerators).
For use under extreme conditions (e.g. high
humidity, when metal swarf is being produced,
etc.) electric safety can be improved by inserting
an isolating transformer or a (FI) earth-leakage
circuit-breaker.
4 Keep children away
Do not let children come into contact with the
tool or extension cord. Supervision is required for
those under 16 years of age.