Operating The Walkie-Talkies; Switching The Walkie-Talkie On/Off; Volume Control; Transmitting And Receiving - AUDIOLINE Power PMR 40 Bedienungsanleitung

4 Operating the Walkie-Talkies

Switching the walkie-talkie on/off

Volume control

/

Transmitting and receiving

Transmitting
☞
Hold the walkie-talkie approx. 5 to 7 cm from your mouth
and speak at a normal volume. In order to talk to other sub-
scribers, the respective walkie-talkies must be set to the
same channel and CTCSS code.
Receiving
☞
Radio signals cannot be received when the PTT button
is being pressed.
Operating the Walkie-Talkies
For switching on the walkie-talkie press and
hold down the menu key. An acoustic signal is
issued. The current channel setting appears in
the display and the Ready LED flashes.
For switching off the walkie-talkie press and
hold down the menu key.
Press vol+ oder vol - to increase or decrease
the volume.
After pressing the PTT button, the Ready LED
lights up. If the button is pressed longer than
60 seconds, a warning signal is issued. Trans-
mission is interrupted.
Release the PTT button.
GB
7