Charging The Battery Pack; Attaching The Belt Clip - AUDIOLINE Power PMR 40 Bedienungsanleitung

Preparing the Walkie-Talkies for Use

Charging the battery pack

Connect the charging station as illustrated in the diagram. For
safety reasons, only use the power adapter plug supplied.
Mains power outlet
Before using the walkie-talkies for the first time, charge them for
at least 14 hours. When the walkie-talkies are connected cor-
rectly, the red LEDs light up. The LEDs only signal that the con-
nection is correct and continue to light up even when the battery
packs are fully charged.
a
Caution: Do not charge the walkie-talkies with charging
units from other manufacturers.
The current battery charge status is indicated in the display:
Full
As soon as the indicator flashes in the display and acoustic
warning signals are issued, the battery pack needs to be
recharged.

Attaching the belt clip

Insert the belt clip in the
opening provided until it
audibly snaps into place.
To remove the belt clip,
press on it and pull it from
the opening.
Half empty Low Empty
GB
5