PMR 23 GB_271112_dtp 27.11.12 14:51 Seite 7
4 Operating the Walkie-Talkies
Switching the walkie-talkie on/off
Volume control
/
Transmitting and receiving
Transmitting
Hold the walkie-talkie approx. 5 to 7 cm from your mouth and speak at
a normal volume. In order to talk to other subscribers, the respective
walkie-talkies must be set to the same channel.
Receiving
Radio signals cannot be received when the PTT button is being
pressed.
Transmit ringing tone
The ringing tone indicates to other subscribers that you want to talk to
them. A condition for this is that the other subscribers are using the same
channel.
Operating the Walkie-Talkies
For switching on the walkie-talkie press and hold down
the On/Off key. A "beep" sound will be heard and the
LCD screen will display the current channel.
For switching off the walkie-talkie press and hold down
the On/Off key. A "beep" sound will be heard and the
LCD screen will turn blank.
or ▼ to increase or decrease the volume.
Press
Press the PTT button.
screen.
The unit is continuously in receive mode when the unit is
turned ON and not transmitting. When a signal is
received on the current channel, the receive signal icon
RX
will be displayed on the LCD screen.
Send ringing tone.
TX
will be displayed on the LCD
GB
7