Operating The Walkie-Talkies; Switching The Walkie-Talkie On/Off; Volume Control; Transmitting And Receiving - AUDIOLINE Power PMR 46 Bedienungsanleitung

PMR 46 GB_041212_dtp 04.12.12 12:33 Seite 8

Operating the Walkie-Talkies

4 Operating the Walkie-Talkies

Switching the walkie-talkie on/off

Volume control

Transmitting and receiving

Transmitting
approx. 1 second and speak at a normal volume. In order to talk to other
subscribers, the respective walkie-talkies must be set to the same channel.
Receiving
pressed.

Transmit ringing tone

The ringing tone indicates to other subscribers that you want to talk to
them. A condition for this is that the other subscribers are using the same
channel.
8
For switching on the walkie-talkie press and hold down
the menu key. A special "beep" sound will be heard and
the LCD screen will display the current channel.
For switching off the walkie-talkie press and hold down
the menu key. A special "beep" sound will be heard and
the LCD screen will turn blank.
Press
/
Press the PTT button.
screen.
Hold the walkie-talkie approx. 5 to 7 cm from your mouth, wait for
The unit is continuously in receive mode when the unit is
turned ON and not transmitting. When a signal is recei-
ved on the current channel, the receive signal icon
will be displayed on the LCD screen.
Radio signals cannot be received when the PTT button is being
Send ringing tone.
or ▼ to increase or decrease the volume.
TX will be displayed on the LCD
X