Operating the Walkie-Talkies
Confirmation signal
The confirmation signal is issued on releasing the PTT button.
This signals to the caller that you have ended transmission.
Activating/Deactivating the confirmation signal
Switch the walkie-talkie off. Press and hold the
while doing so, switch the walkie-talkie on again. If the confirma-
tion signal is activated, the
Headset
You can use the headset enclosed with the equipment to be able
to work faster, for example. Clip the walkie-talkie on the belt so
that you have both hands free. Since the headset supplied is
equipped with an additional PTT button, you can transmit simply
by using the PTT button on the headset.
CAUTION: Excessive sound pressure from earphones and
headphones can cause hearing loss.
Automatic deactivation
The walkie-talkies can be set up so that they are automatically
switched off after a certain time. It can be set to 30, 60 or 90
minutes. The function is deactivated when the "0" setting is
selected.
4 x
/
Stopwatch
The walkie-talkies can be used as stopwatches.
5 x
12
icon appears in the display.
Press the menu key 4 times.
Select the desired time.
Confirm with the PTT button.
Press the menu key 5 times.
Start / Stop / Resume
Reset
button and,